Tidal Tactical Zeus Cannon PRO Series 7.62mm Steel Suppressor - Black Cerakote

Tidal Tactical Zeus Cannon PRO Series 7.62mm Steel Suppressor - Black Cerakote

If you train hard, shoot heavy, and demand a suppressor that keeps pace with everything you put it through — the Tidal Tactical Zeus Cannon PRO was built specifically for you. This is not a range-day-only can. This is not a light-duty suppressor dressed up in premium marketing. The Zeus Cannon PRO is a full-auto rated, SOCOM stress-test proven, 17-4 PH stainless steel suppression system engineered for the shooter who goes through ammo like it owes them something — and needs a silencer that never flinches, never fails, and never asks for a break.

Where the Core Series brought titanium efficiency to moderate-use platforms, the Zeus Cannon PRO brings raw, steel-forged durability to the shooters who need it most. Forged from 17-4 PH stainless steel via state-of-the-art DMLS 3D printing and heat-treated to H900 for maximum strength, the PRO's construction is purpose-matched to the wide-ranging muzzle pressure spectrum generated by everything from .223 Rem to .300 RUM — and every cartridge in between. Optimized around 7.62mm performance with no minimum barrel restrictions, the Zeus Cannon PRO doesn't just tolerate hard use — it was designed around it.

Inside, TIDAL's WAV™ Weapon Acoustic Venting architecture works exactly as advertised: wave-shaped internal geometry traps sound, pushes pressure forward, cools gas faster, and reinforces structural integrity where it matters most — all without demanding the frequent cleaning and maintenance cycles that high-output suppressor use typically imposes. The Zeus Cannon PRO stays cleaner, runs longer, and delivers consistent suppression performance across calibers, barrel lengths, and host firearms that would stress-test lesser cans into failure.

Every PRO ships with the Rearden Atlas Gen 2 HUB mount and R2S 5/8×24 flash hider — an ultra-light, rock-solid Plan B quick-detach combo that mounts and removes in seconds. The 1.375×24 HUB-compatible thread interface and ¾" socket end cap keep the system fully tool-accessible for fast field service when you need it. Finished in Black and Flat Dark Earth C-Series high-temp Cerakote® with a topography-inspired surface texture, the Zeus Cannon PRO looks exactly like what it is: a purpose-built, heavy-use suppressor that means business.

Full-Auto Rated — Passes Multiple SOCOM Stress Test Cycles
The Zeus Cannon PRO has been validated through multiple cycles of the SOCOM suppressor stress test — full-auto magazine dumps, no minimum barrel length restrictions, confirming the structural and thermal performance that duty-grade and high-volume shooters demand from a suppressor they can stake their training schedule on.

DMLS 3D-Printed 17-4 PH Stainless Steel
Manufactured on state-of-the-art Direct Metal Laser Sintering (DMLS) 3D printers using 17-4 PH stainless steel and heat-treated to H900 condition for maximum hardness and tensile strength, the Zeus Cannon PRO's construction handles the wide-ranging muzzle pressure demands of multi-caliber use — from .223 Remington through .300 RUM — without the structural fatigue or erosion that high-output use inflicts on lesser suppressor materials.

TIDAL WAV™ Weapon Acoustic Venting Architecture
Proprietary wave-shaped internal geometry actively manages combustion gas flow, enhances sound trapping efficiency, directs gases forward away from the action, and structurally reinforces the suppressor body under sustained heat and stress — delivering superior suppression performance, reduced maintenance requirements, and long-term durability that conventional baffle-stack designs cannot match.

Zero-Backpressure Design
Low-backpressure internal architecture actively minimizes gas to the face during suppressed fire, keeping the host rifle's bolt carrier group cleaner over extended use, and maintaining comfortable, controlled shooting across the full supported caliber range.

Multi-Caliber Rated
Purpose-built around 7.62mm performance and tested across multiple calibers up to .300 RUM with no minimum barrel length restrictions, the Zeus Cannon PRO Series is a true one-suppressor solution for the multi-caliber shooter who needs a single can to cover every rifle in the safe.

Rearden Atlas Gen 2 HUB Mount with R2S Flash Hider
The Zeus Cannon ships complete with the Rearden Atlas Gen 2 HUB quick-detach mount and a Rearden R2S 5/8×24 flash hider, providing an immediate, tool-free QD mounting solution.

1.375×24 HUB-Compatible
The industry-standard 1.375×24 HUB thread pitch provides broad mounting system compatibility across the widest range of HUB-pattern mounts, direct thread adapters, and quick-detach systems.

C-Series Cerakote® Black Finish
The Zeus Cannon's C-Series Cerakote® black finish delivers industry-leading coating hardness, chemical resistance, and corrosion protection, while the topography-etched surface adds a distinctive tactical aesthetic that makes this suppressor as visually refined as it is functionally capable — subtle in the field, unmistakable up close.

Specifications

• Caliber: 7.62mm (Multi-Caliber Rated Through .300 RUM)
• Material: 17-4 PH Stainless Steel
• Construction: DMLS 3D Printed, H900 Heat Treated
• Internal Architecture: WAV™ Weapon Acoustic Venting
• Length: 6.5 Inches
• Diameter: 1.8 Inches
• Weight: 17 oz
• Coating: C-Series High-Temp Cerakote® Black
• Thread Pitch / Mounting: 1.375×24 TPI — HUB Compatible
• End Cap: ¾" Socket Tool-Accessible Field Service
• Backpressure Design: Zero Backpressure Engineered
• Full-Auto Rating: Yes, Multiple SOCOM Stress Test Cycles Passed
• Minimum Barrel Restriction: None
• Mounting System: Plan B Quick-Detach
• Included in Box: Suppressor, Rearden Atlas Gen 2 HUB Mount, Rearden R2S 5/8×24 Flash Hider, Online Manual and Specs Card