Tools

The SOLUS Vice Jaws are a composite set of jaws made to work with an existing bench vise. Simply attach the Jaws to either side of the SOLUS action and tighten it down in the bench vise. The simple to use design makes it an easy choice when you need to...

The SOLUS Action Wrench is specifically designed to torque the SOLUS Action to a shouldered barrel. It utilizes a three-lug wrench tip, like the bolt that is replaceable. This is a must have tool if you are using a shouldered barrel. Aero Precision,...

SureFire Suppressor Alignment Tool - 9MMThe SureFire Bore Rods are intended for concentricity check prior to firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any issue of alignment, if present...

Sig Sauer Wrench For SL Series Suppressors Factory recommended wrench for SIG SAUER SL series suppressor products.

338 ALIGNMENT ROD HUXWRX’ 5.56 bore alignment rods ensure proper concentricity and alignment of the suppressor and muzzle device along the bullet trajectory to prevent misalignment and strikes. It is recommended that barrel-to-suppressor alignment...

556 ALIGNMENT ROD HUXWRX’ 5.56 bore alignment rods ensure proper concentricity and alignment of the suppressor and muzzle device along the bullet trajectory to prevent misalignment and strikes. It is recommended that barrel-to-suppressor alignment...

762 ALIGNMENT ROD HUXWRX’ 7.62 bore alignment rods ensure proper concentricity and alignment of the suppressor and muzzle device along the bullet trajectory to prevent misalignment and strikes. It is recommended that barrel-to-suppressor alignment...

Extreme temperature Flexbar Rocksett High temperature Rocksett is an all-purpose ceramic adhesive cement that is ideal for installing muzzle devices and suppressor mounts. BENEFITS Extreme temperature resistance (-350°F to 2015°F) makes...

NSR Barrel Nut Wrench – 1 1/4″ The NSR Barrel Nut Wrench is a 1-1/4″ wrench adaptor for N6 NSR (AR-10) handguard installation.  Please note:  This wrench is also used to install a Gen4 N4 barrel nut. 3/8″ STEEL...

Joint Muzzle device Wrench Duplex 3/4 wrench for A2 compensator/flash suppressor, and thinner 3/4 wrench on opposing side for Wrench) CAUTION! Do not exceed 50 ft lb of torque on...

DEAD LEVEL RETICLE LEVELING DEVICE The Dead Level levels your reticle in relation to the Earth taking out any margin of error of the reticle not being perfectly level with the scope body. Simply attach your scope to the Dead Level, level the device with...

B5 Systems, B5 Systems, M4 Multi-Tasker Tool, Fits B5 Stock, Tool is Compatibl with AR-15, Black The MultiTasker M:4 AR-15 Tool is a 1-piece multi-tool for the M4 carbine designed and manufactured in conjunction with B5 Systems. The M4 is precision...