Suppressor Mounts & Accessories

SureFire Suppressor Alignment Tool - 5.56The SureFire Bore Rods are intended for concentricity check prior to firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any issue of alignment, if present...

Griffin Taper Mounts interface with RECCE, PALADIN, Sportsman, and Optimus series silencers. The Minimalist series supports the Optimus 9 Mid-Size configuration as well as Optimus micro with taper extension. Constructed of 17-4 PH stainless steel, the...

Get the right collar to fit your Wolverine thread insert. The smaller threads will use the M14 Collar, M24 thread will use the M24 collar, and the M26 thread will use the M26 collar.   M24 THREAD INSERT

90T – 1/2×28 – SR Series 90T – 5/8×24 – SR Series

Otter Creek Labs - OPS/AE O.T.B. Adapter One piece Over The Barrel (OTB) adapter for ops inc 12th model, AEM5 and OCM5. Made from H900 heat treated 17-4 steel this one piece adapter will allow you to mount your silencer to any barrel with...

OPS/AE P.T.B. Adapter Gen 2 - Raw Heat Treat The OPS/AE PTB (Past the Barrel) Adapter Gen 2 is a one-piece silencer mount engineered for use with OPS Inc. 12th Model, AEM5, and OCM5 suppressors. Designed to accommodate barrels that are not compatible...

OCL -Direct Thread AdapterMade from 17-4 stainless steel with a beautiful H900 heat treated natural finish, these direct thread mounts can be used with any silencer with industry standard 1.375×24 mounting threads. They can use any 7/8 or...

Otter Creek Labs - Gordon Collar Assembly These will be a “limited” production item, with one batch of 200 units made once per year. As of 5-9-22 the 2022 batch is sold out. Look for the next batch, Q1 of 2023. The outer clamp is made from...

Otter Creek Labs, Midway Adapter The midway adapter is the red-headed stepchild of adapters. It’s in the middle, hence the name. It doesn’t reflex all the way over the barrel like the OTB series, but it also doesn’t add full length to...

OCL - ZR0 DTA These direct thread adapters are made by Rearden MFG and are a second generation to the ZR0 DTA, they can also be found on the Rearden website. The original ZR0’s were great but one complaint OCL got from users was it was hard to get...

OCL - ZR0 DTA These direct thread adapters are made by Rearden MFG and are a second generation to the ZR0 DTA, they can also be found on the Rearden website. The original ZR0’s were great but one complaint OCL got from users was it was hard to get...

18" Mark 12 Mod 0 SPR Gen II Upper in 5.56 Cal. 1-8 Twist This Mark 12 Mod 0 Retro Gen II, ready to shoot 5.56 upper is equipped with a 18" Douglas 416 stainless steel barrel 1-8 twist with a fitted bolt and commercial carrier, flat-top receiver, PRi...