Forward Controls Design DPW Dual Purpose Wrench NOTE: the first batch of DPW has very light engraving.  Torque values are on the instructions card and below:   Torque value for muzzle devices: 25 ft lb, +/- 5 ft lb. Torque value for TDP...

Forward Controls Design JMW Joint Muzzle Device Wrench - Black Oxide CAUTION! Do not exceed 50 ft lb of torque on the suppressor/thinner side of the JMW.   Take care to neutralize Rockset or thread locker on the existing muzzle device already...

Forward Controls Design ACF Charging Handle - ODG ACF is not compatible with SIG MCX, 516, Q's shorty stock, and SB Tactical HBPDW brace.     ACF (Ambidextrous Charging handle, Forward Controls) was in development since mid 2018, with...

Forward Controls Design ACF Charging Handle - FDE ACF is not compatible with SIG MCX, 516, Q's shorty stock, and SB Tactical HBPDW brace.     ACF (Ambidextrous Charging handle, Forward Controls) was in development since mid 2018, with...

Forward Controls Design ACF Charging Handle - Black ACF is not compatible with SIG MCX, 516, Q's shorty stock, and SB Tactical HBPDW brace.     ACF (Ambidextrous Charging handle, Forward Controls) was in development since mid 2018, with its...

Forward Controls Design ACF-MCX Charging Handle - FDE  ACF-MCX is compatible only with SIG Virtus, MCX Spear, Spear LT, and Rattler (5.56mm, 300 Blackout, 7.62x39mm only), it will not work on TDP spec AR15 and M16, or MPX.   The forward...

Forward Controls Design ACF-MCX Charging Handle - Black  ACF-MCX is compatible only with SIG Virtus, MCX Spear, Spear LT, and Rattler (5.56mm, 300 Blackout, 7.62x39mm only), it will not work on TDP spec AR15 and M16, or MPX.   The forward...

Forward Controls Design OPF-P320 Trijicon RMR Optics plate for SIG P320    NOTE: Army issued M17/M18 slide has slightly different plate mounting, the OPF-P320, RMR, RSD is incompatible with Army issued M17/M18.   OPF-P320, RMR, RSD...

Forward Controls Design OPF-G Leupold Delta Point Pro Optic plate for Glock MOS    Starting from September of 2024, OPF-G, DPP will come with the M3 0.5 x 6mm plate to slide screws, but will no longer come with the M4 0..7 x 15.8mm DPP...

Forward Controls Design OPF-M17 Aimpoint ACRO Optic plate for SIG M17/M18 ATTENTION, Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO.  Should this be the case, firmly push...

Forward Controls Design OPF-G Trijicon RMR Optic plate for Glock Gen 5 MOS OPF-G, RMR is compatible with RMR, SRO, and the new RMR HD and RCR.  If your RMR, RMR HD, and SRO come with sight to plate 6-32 screws, be sure to only use the 3/8" screws,...

B5 Systems Vertical Grip MLOK - Woodland The B5 Systems Vertical M-LOK® Grip is ergonomically designed to optimize weapon handling. Features aggressive four-sided texture and includes M-LOK® installation hardware.Features Mounts in 2...