Forward Controls Design EMR-HC Enhanced Magazine Release - Dimpled

The Enhanced Magazine Release-Continuous Serrations features a slightly curved button surface to fit the natural curvature of your finger. The form fitting curve, along with horizontal serrations, create a self centering surface that inhibits the finger's vertical movements. The EMR-C has an uninterrupted surface and serrations, its taller profile makes it easier to press and is only 0.04 taller than the factory magazine release button. When installed, the EMR-C has a 0.08 protrusion above the mag release button fence on most forged receivers.

Due to the EMR-C's installed height which protrudes 0.08" over the mag release fence when installed (only 0.06" or 0.07" of  the magazine release button travel is needed to drop a magazine), EMR-C is recommended for 7.62mm ARs only, though it does work on 5.56mm ARs and M16s.  For defense and duty ARs and M16s, please use our EMR that has only a 0.01" protrusion over most forged receiver magazine release fence.

For .308 ARs, the EMR-C's taller profile will allow you to use AR15/M16 spec mag catch and ambidextrous mag catch/release.  An EMR-C installed on a .308 AR will not protrude over the mag release fence.

Please visit the EMR vs EMR-C page for an in depth review of the differences between the EMR and EMR-C.

Made from 4140 bar stock and QPQ coated.